AntoineAsphalt.caFence cost guide
How Much Does a Fence Cost in Hamilton? (2026 Guide)
Typical Ontario installed ranges (2026) run from about $15–$40 per linear foot for chain link up to $55–$95 for composite, with pressure-treated wood at $30–$55 and cedar at $45–$75. A 100 ft pressure-treated privacy fence therefore lands around $3,000–$5,500 before gates and removal. Your exact price comes from an on-site quote.
Typical Ontario installed ranges (2026) run from about $15–$40 per linear foot for chain link up to $55–$95 for composite, with pressure-treated wood at $30–$55 and cedar at $45–$75. A 100 ft pressure-treated privacy fence therefore lands around $3,000–$5,500 before gates and removal. Your exact price comes from an on-site quote.
What does a fence cost per linear foot in Hamilton?
Fence pricing is quoted per linear foot of installed fence, including posts, concrete, rails, boards or panels and labour. The ranges below are market data for Ontario, not a quote from Antoine Landscape Contractors.
| Material | Per linear ft | 50 ft run | 100 ft run | 150 ft run |
|---|---|---|---|---|
| Pressure-Treated Wood | $30–$55 | $1,500–$2,750 | $3,000–$5,500 | $4,500–$8,250 |
| Cedar | $45–$75 | $2,250–$3,750 | $4,500–$7,500 | $6,750–$11,250 |
| Vinyl | $45–$85 | $2,250–$4,250 | $4,500–$8,500 | $6,750–$12,750 |
| Chain Link | $15–$40 | $750–$2,000 | $1,500–$4,000 | $2,250–$6,000 |
| Aluminum (ornamental) | $35–$65 | $1,750–$3,250 | $3,500–$6,500 | $5,250–$9,750 |
| Composite | $55–$95 | $2,750–$4,750 | $5,500–$9,500 | $8,250–$14,250 |
Aluminum privacy slat systems are typically higher than the ornamental range. Totals are simple length × range and exclude gates, removal and site-specific work.
How can I estimate my own fence budget?
Use the planner to combine length, height, material, gates and old-fence removal. It applies the same market ranges shown above, so treat the result as a planning bracket rather than a price.
What makes a fence cost more or less?
Two fences of the same length can price very differently. Most of the difference comes from height, gates and what happens below ground.
- Height: a 4 ft fence uses about a third less material than 6 ft; 5 ft sits between; 8 ft adds bracing and wind-load cost
- Gates: priced separately because hinges, latches and framing vary
- Old fence removal and disposal: roughly $3–$10 per linear foot, with concrete-set posts at the high end
- Slope: stepped or racked panels take more layout and cutting time
- Access: narrow side yards and no machine access add hand-digging and carrying
- Rock and roots: obstructions slow post-hole digging and can move post locations
- Post depth: posts set about 4 ft deep in concrete below frost depth cost more than shallow posts, and last longer
- Finish or stain on wood fences
- Pool enclosures: a building permit is needed in Hamilton, plus code-compliant gate hardware
How much of a fence quote is labour versus material?
Labour typically represents roughly 40–60% of an installed fence. Layout, utility locates, digging, setting and curing posts, hanging rails and boards, framing gates and cleanup are all labour. That is why a cheaper board rarely cuts a total quote in half.
How should I compare fence quotes?
Line up quotes on the same scope before comparing totals. A low number often means shallower posts, smaller posts or missing cleanup.
| Item | What to ask |
|---|---|
| Post depth | How deep are posts set? Below frost (about 4 ft) or shallower? |
| Post size | What post dimension and spacing are used? |
| Concrete | Are posts set in concrete, and how long is it cured before loading? |
| Hardware | What hinges, latches and fasteners are included for gates? |
| Locates and survey | Who books the Ontario One Call locate and confirms the property line? |
| Cleanup | Is old-fence haul-away and site cleanup included? |
How can I save money on a new fence?
Savings come from design decisions, not from cutting the foundation.
- Use full privacy only where it matters and open styles elsewhere
- Choose 4 or 5 ft where 6 ft is not needed
- Limit the number of gates, and standardize their width
- Keep posts at the correct depth; re-setting heaved posts costs more later
- Plan the fence with a patio or retaining wall so excavation and access are shared
Frequently asked questions
How much does a 100 ft fence cost in Hamilton?
Using typical Ontario installed ranges (2026), 100 ft runs from about $1,500–$4,000 for chain link, $3,000–$5,500 for pressure-treated wood, $4,500–$7,500 for cedar and $5,500–$9,500 for composite, before gates and removal. Your exact price comes from an on-site quote.
Are gates included in per-foot fence pricing?
Usually not. Gates are priced separately because hinges, latches and framing vary by width and material.
What does old fence removal cost?
Typical removal and disposal is about $3–$10 per linear foot, with concrete-set posts at the high end.
Is labour most of the cost of a fence?
Labour typically makes up roughly 40–60% of an installed fence, covering layout, digging, setting posts, assembly, gates and cleanup.
Is a 4 ft fence much cheaper than 6 ft?
A 4 ft fence uses about a third less material than 6 ft, though labour for posts and layout does not drop by the same amount.
Do I need a permit for a fence in Hamilton?
A standard boundary fence may not need a building permit, but Hamilton requires one for pool enclosures and height rules still apply. Confirm current rules with your municipality before building.
Related fence information
From guide to site plan
Get an on-site fence quote
Call (647) 459-7775 or send the essentials. Your exact price comes from an on-site quote.