Best for
- Front gardens that should remain open
- Pool enclosures designed around applicable rules
- Slopes where rackable panels follow grade
- Modern yards needing low-maintenance privacy slats

Fences · Aluminum · Hamilton
Aluminum covers two needs: open black ornamental pickets for gardens, slopes and pools, and modern privacy slats for an architectural edge. Ornamental aluminum has typical Ontario installed ranges (2026) of $35–$65 per linear foot and a 20–30+ year lifespan; privacy slats are typically higher and quoted on site.
Aluminum covers two needs: open black ornamental pickets for gardens, slopes and pools, and modern privacy slats for an architectural edge. Ornamental aluminum has typical Ontario installed ranges (2026) of $35–$65 per linear foot and a 20–30+ year lifespan; privacy slats are typically higher and quoted on site. Your exact price comes from an on-site quote.
Fit before finish
Profiles & details
Black powder-coated rails make a refined open boundary.
Panels follow slopes without large stepped gaps.
Horizontal battens create a crisp screen.
Warm appearance without staining.
Coordinated frames and latches complete the line.

Balanced guidance
Material decision
Black modern or ornamental · Pools, entries and modern yards
$35–$65/linear ft
Crisp, matte or woodgrain · Low-maintenance privacy
$45–$85/linear ft
Typical Ontario installed ranges (2026). Your exact price comes from an on-site quote.
| Material | Look | Privacy | Lifespan | Maintenance | Typical Ontario installed range (2026) |
|---|---|---|---|---|---|
| Pressure-Treated Wood | Classic warm wood | 5/5 | 15–20 years | Higher | $30–$55 per linear foot |
| Cedar | Premium natural grain | 5/5 | 15–25 years | Higher | $45–$75 per linear foot |
| Vinyl | Crisp, matte or woodgrain | 5/5 | 25–30+ years | Low | $45–$85 per linear foot |
| Chain Link | Open and practical | 1/5 | 15–20+ years | Low | $15–$40 per linear foot |
| Aluminum | Black modern or ornamental | 2/5 | 20–30+ years | Low | $35–$65 per linear foot |
| Composite | Modern, uniform boards | 5/5 | 25–30 years | Low | $55–$95 per linear foot |
Planning range
Below grade first
Metal systems rely on accurate modules and firm support. We plan panel widths, slopes, gate posts and concrete or wall interfaces first.
Set in-ground posts in concrete below frost
Rack suitable ornamental panels to follow slopes
Core-drill or surface-mount only on suitable concrete or stone
Size privacy-panel structure for wind exposure
Coordinate gates and latches for pool use
A post set about 4 ft deep extends below local frost depth, helping the footing resist seasonal movement.
Ownership timeline
Wash away residue and check gate alignment after the first seasonal cycle.
Clean with mild soap and touch up localized coating damage compatibly.
Maintain drainage and correct gate or footing movement promptly.
Hamilton · Burlington · Oakville
By-law 10-142 generally permits 2.0 m; Pool By-law 16-184 requires at least 1.5 m and openings that reject a 100 mm sphere.
By-laws 024-2003 and 074-2005 apply; thumb-latch hardware alone does not count as self-latching.
By-law 2002-034 allows 2.0 m outside front yards; By-law 2006-071 requires a pool-enclosure permit.
An ornamental system can meet pool rules only when height, openings, climbability and gate details comply. Confirm current rules with your municipality before building.
Confirm current rules with your municipality before building.
Read the fence bylaw guide →Material-specific answers
No. Aluminum provides a similar ornamental appearance without iron’s rust-maintenance profile.
It does not rust like iron or steel, though its powder coating benefits from cleaning and repair if damaged.
A suitable system can, but height, openings, climbability and gates matter. Hamilton uses a 100 mm sphere test. Confirm locally.
Solid panels catch more wind than pickets, so post size, spacing, footing and exposure must be considered.
Black is established for ornamental work. Privacy products may offer charcoal, matte and woodgrain finishes depending on manufacturer.
Rackable panels follow many slopes. Wall mounting requires a suitable cap and anchoring condition; Hamilton measures height from the wall top.
Local installation
Hamilton
Burlington
Oakville

Start on site
Share the length, height, gate needs and city. We’ll arrange the free on-site visit that produces your exact quote.